Cisco 7960 Administrator's Manual page 2

Objectives
Objectives
Organization
Cisco SIP IP Phone 7960 Administrator Guide
x
The Cisco SIP IP Phone 7960 Administrator Guide provides necessary
information to get the Cisco SIP IP phone operational in a Voice-over-IP (VoIP)
network.
It is not the intent of this administrator guide to provide information on how to
implement a SIP VoIP network. For information on implementing a SIP VoIP
network, refer to the documents listed in the "Related Documentation" section on
page xi.
This administrator guide is divided into the following chapters and appendixes:
• Chapter 1, "Product Overview" describes SIP and the Cisco SIP IP phone.
Chapter 2, "Getting Started with Your Cisco SIP IP Phone" describes how to
•
install, connect, and configure the Cisco SIP IP phone.
• Chapter 3, "Managing Cisco SIP IP Phones" describes how to modify the
Cisco SIP IP phone's network and SIP settings, how to access network and
call status information, and how to upgrade the firmware.
Appendix A, "SIP Compliance with RFC-2543 Information" provides
•
reference information about the SIP IP phone compliance to RFC 2543.
Appendix B, "SIP Call Flows" provides reference information about the
•
SIP IP phone call flows.
Appendix C, "Technical Specifications" lists the physical and operating
•
environment specifications, cable specifications, and connection
specifications.
• Appendix D, "Translated Safety Warnings" lists translated safety warnings
that should be followed when installing an electrical device such as the
SIP IP phone.
About This Guide
78-10497-01