Audio Indicators; Battery Status Led - Datamax OC2 BT Technical Manual And User Manual

OC-2 SERIES OF PRINTERS USER'S GUIDE
• Power Button/LED on page 14
• Media Function Button/LED on page 14
• Radio Button/LED on page 15
• Reset Button on page 15
• CardReader Audio Indicators on page 15
Battery Status Power Button/
LED LED

Audio Indicators

Beep(s) Description
1 short Printer wakes up.
2 short Out of paper.
3 short Low battery.
1 very short RF power is on.
Note: This beep occurs when
you press the RF power button
and the RF power was off.
2 very short RF power is off.
Note:
This beep occurs when you
press the RF power button and the
RF power was on.
1 long Boot code is starting or
restarting.
8 short CRC error in firmware.

Battery Status LED

Battery Description
Status LED
Media Function Radio
Button/LED Button/LED
Action
None.
Install paper.
Charge battery.
None.
None.
Redownload firmware.
Redownload firmware.
U
SING THE CONTROL PANEL
Action
12
Reset
Button