Page 1
Multifrequenz-Funk- Solarwerk Multi-frequency radio-controlled solar movement J615.84 JUNGHANS – DIE DEUTSCHE UHR...
Page 2
You can see and sense this in every watch that carries the Junghans name. For as diverse as the Junghans range may be, it pursues one single goal: to combine traditional craftsmanship with cuttingedge watch...
Automatic time synchronisation interim there have been water clocks, the mechanical clocks of the 13th Functions century and quartz watches. Now we have the Junghans radiocont Selectable LC displays rolled watch. This is a watch that, with good reception, will never go Reception indicator wrong and never need setting.
Page 4
– DCF77 in Mainflingen (24km south of Frankfurt am Main) for turbed reception is available (at night). If you travel to a country with Europe, another time zone, the time zone setting of the Junghans multifre – JJY40 on Mount Ohtakadoya (near Tokyo in the North East of the quency radiocontrolled solar watch enables the time to be set simply...
– penetrates the solar or lighttransparent watch face. After a successful transmitter call or restart, your Junghans mul This transforms the light into electrical energy, which gets saved in a tifrequency radiocontrolled solarpowered watch always reads in longlife power store.
Key lock (depending on model) saved and tries to synchronise in line with CET at 10 a.m. in Japan. At Depending on the model of your Junghans multi-frequency radio - that time of day interference is disproportionately greater than when solar watch you have the option of locking the T2 key.
5. Selectable LC displays The LC display is showing the date. By briefly pressing button T1, you can activate the reception indicator. After 3 seconds, the display swit ches back to the date. If the charge level is low, the LC display shows the seconds (flashing alternately with [Lo]).
6.1 Manual time synchronisation (transmitter calls) The time zones displayed when picking up the signal from the respec To perform manual time synchronisation, called making a ‘transmitter tive transmitters are as follows: call’, press button T1 for longer than 3 seconds. The second hand begins Transmitter Time transmitted to move and positions itself at 12 o’clock.
6.2 Setting the time zone Perform the following settings using the procedure described above: The Junghans multifrequency radiocontrolled solar watch receives – Set the date – the LC display switches to [£ ¡] (or the final day in the the signal of DCF77, JJY40, JJY60 and WWVB. This means that the...
8. Charge level indicator on watches using solar power In order to keep your Junghans multifrequency radiocontrolled With the power store fully charged, the Junghans J615.84 multifre solarpowered watch ready for use, it should be kept in a very well lit quency radiocontrolled solarpowered movement has power reserves...
8.1 Restarting after a complete discharge of the power store 9. Charging times Following a complete discharge of the energy store the Junghans mul 9.1 Daily operation tifrequency radiocontrolled solar watch must be placed in a source of The following table shows how long the watch needs to be exposed to light in order to recharge the energy store.
Junghans specialist. Other servicing table are for orientational use only. Please note that the design of the tasks or wrist strap repairs should also be done by your Junghans solar dial affects the charging time.
Declaration of conformity Uhrenfabrik Junghans GmbH & Co. KG herewith declares that this wristwatch conforms to the principle requirements and other relevant stipulations of Directive 1999/5/EC. A corresponding declaration of conformity can be requested from info@junghans.de. 12. Impermeability Marking Instructions for use...
Need help?
Do you have a question about the J615.84 and is the answer not in the manual?
Questions and answers