Table of Contents
Advertisement
•Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact ac-
cidentally occurs, fl ush with water. If liquid con-
tacts eyes, additionally seek medical help. Liquid
ejected from the battery may cause irritation or burns.
•Do not use a battery pack or tool that is damaged
or modifi ed. Damaged or modifi ed batteries may
exhibit unpredictable behavior resulting in fi re, explo-
sion or risk of injury.
•Do not expose a battery pack or tool to fi re or ex-
cessive temperature. Exposure to fi re or temperature
above 130°C (265°F) may cause explosion.
•Follow all charging instructions and do not charge
the battery pack or tool outside the temperature
range specifi ed in the instructions. Charging im-
properly or at temperatures outside the specifi ed range
may damage the battery and increase the risk of fi re.
•Have your power tool serviced by a qualifi ed repair
person using only identical replacement parts.
This will ensure that the safety of the power tool is
maintained.
•Never service damaged battery packs. Service of
battery packs should only be performed by the manu-
facturer or authorised service providers.
SPECIFIC SAFETY RULES FOR
KNOCKOUT TOOL
•Use tool only as directed. Only trained personnel
should operate tool.
•Do not use in or near live electrical panels. Only
work on de-energised electrical panels. Disconnect all
electrical current before use to avoid the risk of electric
shock.
•Keep hands away from knockout die and punch
while tool is in use. Fingers could be crushed or
severed.
•To reduce the risk of injury, wear safety goggles or
glasses with side shields. Before use, inspect and
discard workpieces and accessories with cracks
or damage. Shards from weakened metal could cause
injury.
•Avoid contact with punched metal edges. Edges
may be sharp and could cause injury.
•Do not attempt to punch through more than one
layer of material at a time. Punching through multiple
layers could cause the material and accessories to
warp break, throwing shards that could cause injury.
•Use tool only with knockout dies and punches
rated for the peak output force of this tool. Other
uses may cause injury or damage to the tool, acces-
sories, and workpiece.
•Maintain labels and nameplates. These carry im-
portant information. If unreadable or missing, contact
®
a MILWAUKEE
service facility for a replacement.
•
Some dust created by power sanding,
WARNING
sawing, grinding, drilling, and other
construction activities contains chemicals known to
cause cancer, birth defects or other reproductive harm.
Some examples of these chemicals are:
• lead from lead-based paint
•crystalline silica from bricks and cement and other
masonry products, and
•arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on
how often you do this type of work. To reduce your
exposure to these chemicals: work in a well ventilated
area, and work with approved safety equipment, such
as those dust masks that are specially designed to
fi lter out microscopic particles.
SERVICE
FUNCTIONAL DESCRIPTION
1
7
8
10
11
12
13
14
SPECIFICATIONS
Cat. No. ................................................. M18HKP-0
Volts .............................................................. 18 DC
Battery Type ................................................. M18™
Charger Type ................................................ M18™
Peak Output Force .................................... 6.7 Tons
Material Capacities ................................................
50mm (2") Conduit......3.4 mm(10 ga) Mild Steel
101mm (4") Conduit ......2.66 mm (12 ga) Mild Steel
50mm (2") Conduit ........................
76mm (3") Conduit ........................
3
2
4
5
6
1. Release button
9
2. Handle
3. LED
4. Lock button
5. Trigger
6. Cylinder
7. Piston (inside cylinder)
8. Coupler
9. Quick connect anvil
assembly
10. Quick connect sleeve
11. Ball pull
12. Draw stud
13. Die
14. Punch
2.78 mm (12 ga)
Stainless Steel
1.98 mm (14 ga)
Stainless Steel
Advertisement
Table of Contents
