Page 1
OPERATOR'S MANUAL Cat. No. M18ONEID-0 M18ONEIWF12-0 M18ONEIWP12-0 M18 FUEL™ 6 MM (1/4") HEX IMPACT DRIVER, & 13 MM (1/2") COMPACT IMPACT WRENCHES WARNING To reduce the risk of injury, user must read and understand operator's manual.
Page 2
GENERAL POWER TOOL •Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left SAFETY WARNINGS attached to a rotating part of the power tool may result Read all safety warnings, instruc- WARNING in personal injury.
•crystalline silica from bricks and cement and other 4. Trigger masonry products, and 5. Handle •arsenic and chromium from chemically-treated lum- 6. Bit holder (M18ONEID-0) ber. 7. Mode selector Your risk from these exposures varies, depending on 8. Belt clip how often you do this type of work.
Page 4
Attaching and Removing Accessories To lock the trigger, push the control switch to the 1/4" Hex Impact Driver (Cat. No. M18ONEID-0) centre position. The trigger will not work when the This impact driver is intended for use with control switch is in the locked position.
Page 5
Never disassemble the tool, battery pack or charger. Contact a ® MILWAUKEE service facility for ALL repairs. Maintaining Tool Keep your tool, battery pack and charger in good repair by adopting a regular maintenance program.
Page 8
SERVICE - AUSTRALIA and NEW ZEALAND MILWAUKEE ® prides itself in producing a premium quality product that is Nothing But Heavy Duty ® . Your satisfaction with our products is very important to us! If you encounter any problems with the operation of this tool, please contact your authorised MILWAUKEE ®...
Need help?
Do you have a question about the M18ONEID-0 and is the answer not in the manual?
Questions and answers