Related Manuals for Milwaukee M18 FORCELOGIC M18HCCT-0C
Summary of Contents for Milwaukee M18 FORCELOGIC M18HCCT-0C
- Page 1 OPERATOR'S MANUAL Cat. No. M18 HCCT M18™ FORCELOGIC™ 300 MM CRIMPER WARNING To reduce the risk of injury, user must read and understand operator's manual.
-
Page 3: General Power Tool Safety Warnings
GENERAL POWER TOOL • Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left SAFETY WARNINGS attached to a rotating part of the power tool may result Read all safety warnings, instruc- WARNING in personal injury. -
Page 4: Specifications
Tool is NOT insulated. Contact with a live circuit could result in severe injury or death. Turn off power before making a crimp. • Use tool only with MILWAUKEE crimping jaw 1. Locking thumb screw 7. Handle ®... -
Page 5: Operation
An incomplete or faulty crimp could WARNING Volts cause a fire. Use tool only with ® MILWAUKEE crimping jaw 49-16-U000, "U" dies, Direct Current and connectors for which they are rated. Jaws, To reduce the risk of dies, and connectors must be used in an approved... -
Page 6: Maintenance
• Electrical inspection (battery pack, charger, motor) maintenance completed. Return tool to • Testing to assure proper mechanical and electrical ® a MILWAUKEE service facility. operation If the tool does not start or operate at full power with 5. Continue crimping according to the connector a fully charged battery pack, clean the contacts on manufacturer's instructions. - Page 8 SERVICE - AUSTRALIA and NEW ZEALAND MILWAUKEE ® prides itself in producing a premium quality product that is Nothing But Heavy Duty ® . Your satisfaction with our products is very important to us! If you encounter any problems with the operation of this tool, please contact your authorised MILWAUKEE ®...
Need help?
Do you have a question about the M18 FORCELOGIC M18HCCT-0C and is the answer not in the manual?
Questions and answers