Device Memory - NOVOTEST UD1 Operating Manual

Caution, when the averaging mode activated it is reduced frequency
of refreshing of signal on the display.
7.8. Measurement mode with signal accumulation
In some cases it may be necessary to detect the maximum of signal,
and get an envelope of signal during scanning.
To activate the envelope mode in group settings "FUNCTIONS"
select the "ENVELOPE" and set the required parameter - on or off.

8 . Device memory

8.1. Saving the results of test and device settings
To save the current settings, in measurement mode press the
"SAVE" key
Select "MEAS." if you want to save device settings or "PROBE" if
you want to save probes settings.
Ultrasonic Flaw Detector NOVOTEST UD-1
, on the devices display image will be fixed (frozen).
Development and manufacturing of non-
destructive testing units and system
27