Specifications - NOVOTEST UD1 Operating Manual

Ultrasonic flaw detector
Table of Contents

Advertisement

4. Specifications

Operating Frequency Range
The range of measured time intervals
(duration of scanning)
Velocity range
The error of measurement of time
intervals
Maximum
permissible
measurement of the amplitudes of the
signals at the receiver input in the
range from 0 to 110 dB
Testing gain range
Averaging over the quantity of starts
Digitally reconfigurable bandpass filter with tunable center
frequency of the filter from 1 Hz to 10 MHz
The range of variation of temporal
sensitivity adjustment (TVG)
Number of control points TVG
The duration of the excitation pulse to
the load
The amplitude of the excitation pulse to
the 50 Ohm load, not less
Operating frequency range of the
receiver on the level -3 dB
Deviation of the amplitudes of input
signals in the range from 10 to 100% of
the screen height not more than
Scanning
Delay of scanning
Range
of
measurement
intervals
Setting a delay in the prism of the from 0 to 15 µs
Ultrasonic Flaw Detector NOVOTEST UD-1
Development and manufacturing of non-
destructive testing units and system
from 1 to 10,0 MHz
from 6 to 1000 µs
1000 - 9999 m / s
not exceed ± 0,025 µs
not exceed ± 0,5 dB;
error
of
125 dB
from 1 to 16
40 dB
15
from 0,0 to 0,5 µs
100, 200, 300
from 1 to 10 MHz
1 dB
from 1 to 1000 µs
from 0 to 2000 µs
from 0 to 1000 µs
of
time
4

Advertisement

Table of Contents
loading

Table of Contents