Setup For Headphones/Speakers/S/Pdif - 2-In-1 Audio Jack - Eluktronics p950hr User Manual

Setup for Headphones/Speakers/S/PDIF - 2-In-1 Audio Jack

To connect either headphones, speakers or a S/PDIF supported system to the 2-In-1
audio jack follow the instructions below:
1. Plug either the headphones or a S/PDIF supported system in to the 2-In-1 audio
jack.
2. When the pop-up menu appears make sure you select the appropriate device by
putting a check in the box alongside it and clicking OK.
3. To make sure the pop-up menu appears see sidebar.
Features & Components

Auto Pop-Up Dialog
You should enable the
auto pop-up dialog to
automatically detect
when a device has been
plugged-in. If disabled,
double-click connector
settings and click
the box to enable the
auto pop-up detection of
plugged-n devices.
Figure 2 - 17
Pop-Up Menu for
Audio Devices
(2-In-1 Audio Jack)
Audio Features 2 - 17
2