ICON Health & Fitness CTTL078040 User Manual page 9

9. Lower the Uprights (64, 69) until the handrails are touch-
ing the floor.
See the lower drawing. Position the Uprights (64, 69) so
that the treadmill Frame (110) is centered between the
Uprights.
Firmly tighten the four Upright Bolts (28). Then, raise the
Uprights (64, 69) back to the vertical position.
10. Attach the Latch Assembly (11) and the Latch Spacer
(71) to the Left Foam Grip (65) with the two Latch
Screws (70) as shown; tighten the indicated Latch
Screw first.
11. Make sure that all parts are properly tightened before you use the treadmill. Keep the included allen
wrench in a secure place. The allen wrench is used to adjust the walking belt (see page 20). To protect the
floor or carpet from damage, place a mat under the treadmill.
9
Handrail
69
10
65
71
11
First
9
64, 69
Top View
110
70
28
64