Power Tool Use And Care - Chicago Electric 65766 Owner's Manual

are connected and properly used.
Use of dust collection can reduce
dust-related hazards.
Only use safety equipment
7.
that has been approved by an
appropriate standards agency.

Power Tool Use and Care

Do not force the power tool. Use
1.
the correct power tool for your
application. The correct power tool
will do the job better and safer at the
rate for which it was designed.
2. Do not use the power tool if the
Trigger
does not turn it on and off.
Any power tool that cannot be
controlled with the Trigger is
dangerous and must be repaired.
3. Disconnect the plug from the
power source before making
any adjustments, changing
accessories, or storing power
tools. Such preventive safety
measures reduce the risk of starting
the power tool accidentally.
4. Store idle power tools out of
the reach of children and do not
allow persons unfamiliar with the
power tool or these instructions
to operate the power tool. Power
Service
Have your power tool serviced by a qualified repair person using only identical
replacement parts.
This will ensure that the safety of the power tool is maintained.
Item 65766 For technical questions, please call 1-888-866-5797.
Unapproved safety equipment
may not provide adequate
protection. Eye protection must be
ANSI-approved and breathing
protection must be NIOSH-approved
for the specific hazards in the work
area.
tools are dangerous in the hands of
untrained users.
5. Maintain power tools. Check
for misalignment or binding of
moving parts, breakage of parts
and any other condition that may
affect the power tool's operation.
If damaged, have the power
tool repaired before use. Many
accidents are caused by poorly
maintained power tools.
6. Keep cutting tools sharp and
clean. Properly maintained cutting
tools with sharp cutting edges are
less likely to bind and are easier to
control.
7. Use the power tool, accessories
and tool bits etc. in accordance
with these instructions, taking into
account the working conditions
and the work to be performed.
Use of the power tool for operations
different from those intended could
result in a hazardous situation.
Page 4