Updating The Thumb Controller And The Receiver - dji Thumb Controller User Manual

Updating the Thumb Controller and the Receiver

You can find the latest firmware version information on this page
and update the firmware by following the steps below:
1. Use the Micro-USB cable to connect the Thumb Controller to
your computer, then wait until the indicator in the Assistant blinks
blue.
2. Click "Update."
3. Wait for the download to finish.
4. Click "Update" again and then click "Confirm."
5. After the update is complete, turn the Thumb Controller off and
then on again.
6. Repeat this process with the Ronin-M or the Ronin External
Receiver, depending on your model.
©
2015 DJI. All Rights Reserved.
18