It is recommend to watch all tutorial videos on the official DJI website (www.dji.com/om-4/ tutorials) or in the DJI Mimo app. Read the disclaimer and safety guidelines and quick start guide before using for the first time. Refer to this user manual for more information.
Introduction Equipped with 3-axis stabilization, DJI OM 4 turns your mobile phone into a camera that can deliver stabilized and super-smooth image. The foldable design makes DJI OM 4 conven- ient to transport and store, while the brand new magnetic connection for the phone means it is even easier to use.
DJI OM 4 can be used as a power bank. Connect your mobile phone to the USB-A port. If DJI OM 4 is powered on, the mobile phone will begin to charge. If DJI OM 4 is powered off, press the M button once to start charging.
Page 7
Mount your mobile phone before powering on DJI OM 4. If no mobile phone is detected, DJI OM 4 will vibrate and enter standby mode. To bring it out of standby mode, press any button after mounting the mobile phone.
Using DJI OM 4 After powering on, DJI OM 4 will enter follow mode by default. The gimbal converts joystick movements into smooth pan and tilt transitions, and reduces the impact of natural vibrations. The mobile phone can by adjusted by hand as well.
Page 9
The lanyard hole can be used to attach a wrist strap. Combination Operation The Bluetooth connection can be reset if DJI OM 4 cannot be connected or found. Press the M button, shutter button, and trigger simultaneously to reset the Bluetooth connection. The Bluetooth connection is reset successfully when the system status indicator turns from green to yellow.
DJI OM 4 User Manual Operating Mode The figures below depict the operation modes when using OM 4 in landscape mode. The same operation modes apply when used in portrait mode. Upright Mode Underslung Mode Upright mode can be used without any Hold DJI OM 4 upside down to enter further user input.
DJI Mimo. 3. When using DJI Mimo for the first time, it is required to activate DJI OM 4 using DJI Mimo. Follow the instructions to activate. Register or log in to a DJI account when activating DJI OM 4.
There are three ways to use ActiveTrack 3.0: a. Drag a box on the screen in the camera view in DJI Mimo. A green box around the subject indicates ActiveTrack 3.0 is successfully enabled. Tap the X icon on the top corner to stop tracking.
Page 15
Gimbal Auto Calibration: reduces drift caused by nearby magnetic interference or human error. Before calibrating, place DJI OM 4 on a flat surface using a tripod. Do not touch the gimbal during calibration.
DJI OM 4 when it is powered off. Rotate the pan and tilt axis to align with the marks on the gimbal and fold DJI OM 4. Note that the hole on the pan motor should be matched with the marker on the arm. DJI OM 4 will enter storage mode and can be folded after powering off.