Table of Contents
Advertisement
Setting EZ News Flash service
You can use EZ News Flash with simple settings for no charge. Refer to
"Initializing E-mail and EZweb" (page 24), complete initializing, and then
make settings for EZ News Flash.
Press u in the standby
screen, select the ticker
and press c (OK).
Press j to select
"はい" (Yes), press
c (選択)(Select), Press
j to select "OK," and
press c (Select).
Setup is complete.
When you complete setup and return to
the standby screen, the message "次回配
信までしばらくお待ちください" (Please
wait a while for the next distribution), will
be displayed on the ticker.
■ Turning EZ News Flash off
To turn off EZ News Flash, operate the following directions:
a While the standby screen is displayed, press u, select the ticker and
press c (News).
b Press % (メニュー )(Menu), use j to select "サービス設定解除" (Service
termination), and press c (選択)(Select).
c Follow the instructions on the screen and turn off the setting.
The setting is turned off, and news distribution will stop.
■ Changing settings of receiving notifi cations
You can change the settings of the tone, vibrator, and LED indicator which
notifi es EZ News Flash distribution.
a While the standby screen is displayed, press c216.
b Set each item.
If you do not need notifi cations when receiving EZ News Flash, set the
item to "OFF."
73
Advertisement
Table of Contents
