Download Print this page

Advertisement

Basic
Manual
Contents/Ready
Phone Call
Inputting
Characters
Address Book/
Pair Function
Mail
Camera
EZweb
EZ Navi
au Media Tuner
Simple Mode/
Teens Mode
Other Functions
Troubleshooting/
Remote Ctrl Lock
Index

Advertisement

   Summary of Contents for Hitachi w52h

  • Page 1

    Basic Contents/Ready Phone Call Manual Inputting Characters Address Book/ Pair Function Mail Camera EZweb EZ Navi au Media Tuner Simple Mode/ Teens Mode Other Functions Troubleshooting/ Remote Ctrl Lock Index...

  • Page 2

    After you finish reading this manual, store it and the printed materials that come with the phone in a safe place for future reference. Printed Manuals for the W52H (Japanese) The W52H comes with a Basic Manual and an Instruction Manual. For information about basic For detailed information...

  • Page 3: Cellphone Etiquette

    Cellphone Etiquette Mind your manners! A cellphone always emits weak radio waves while it is turned on. Enjoy operation of your cellphone without forgetting to be considerate of those around you. Some locations do not allow the use of cellphones. ■...

  • Page 4: Cellphone Basics

    Cellphone Basics Features Camera EZ Navi Hello Messenger Shoot photos and Enjoy meeting with the EZ Navi Walk, record movies, and members using our Passenger Seat Navi, send them by e-mail. original cartoon-like Evacuate Navi and characters. Security Navi allow you Page to get various kinds of location information.

  • Page 5: Manner Mode And Easy Voice Memo

    Normally leave the phone turned on. The phone needs to be turned on to make and receive Power calls. Hold down F for at least 1.5 seconds to turn on W52H. After a while, W52H turns on with tone and the standby screen appears. Page You cannot talk on the phone if it is unable to receive a signal.

  • Page 6: Never Use Your Cellphone While Driving

    Never use your cellphone while driving! Holding a cellphone in your hand, talking on a cellphone, or looking at a cellphone display to send mail or to perform any other operation while driving is prohibited by Japanese law. (Revised Traffic Control Law, effective November 1, 2004) ×...

  • Page 7: Beware Of Spam And One-ring Calls

    A “One-ring Call” (wan-giri in Japanese) rings your phone only once, in an attempt to make you call back to a service that automatically bills you very high charges. If W52H received a “One-ring Call,” the icon appears at the head of an incoming record.

  • Page 8: Disaster Message Board Service

    Disaster Message Board Service Disaster Message Board The Disaster Message Board lets you use EZweb to register information about your well-being in case of a major disaster. The information you register can be accessed from anywhere in Japan over EZweb or the Internet. ◆...

  • Page 9

    Registration Access Disaster Message Board top screen Information registration screen Information screen ※ Registration contents are retained for up to 72 hours. ※ You can register up to 10 entries per phone number. Registering a new entry while there are already 10 registered entries, automatically overwrites the oldest entry.

  • Page 10: Table Of Contents

    Contents Phone Call Making a Call ..........29 Making an International Call ...... 30 Cellphone Etiquette Answering a Call ........31 Redialing (Outgoing Records/Incoming Mind your manners! ........1 Records) ..........32 One-ring Calls ..........32 Cellphone Basics Changing the Ring Tone ......33 Features ............

  • Page 11

    Shooting Photos in Viewfinder Position ..63 Troubleshooting Viewing Photos .......... 65 Attaching a Photo to an E-mail Message .. 66 If you lose your W52H ....... 98 EZweb Index Using EZweb ..........67 Displaying the EZ Top Menu ...... 68 Bookmarking Sites You Frequently Access ...............

  • Page 12: Ready

    Ready Before using the W52H, check the contents of the package comes with your W52H. You should also familiarize yourself with basic operations, like how to charge the battery, how to turn the power on, etc. Checking the Contents of the Package ●...

  • Page 13: Names Of Parts

    1 During a call, do not cover the microphone with your ※ au IC-Card hands or your chin. The microphone (placed on W52H shown above) allows you to talk over your W52H in Viewfinder position. Do not take out this card if not necessary ※...

  • Page 14: Charging The Battery Pack

    The battery pack that comes with the phone is not fully charged when you purchase it. Be sure to charge the battery pack before using the W52H for the first time. Charging takes about 160 minutes. You should recharge the battery pack whenever the battery level icon...

  • Page 15

    If you set “Func in Charge” to “MEDIA STAND,” the screen keeps illuminating with the normal brightness. To remove the W52H from the desktop holder, holding the holder by hand and remove W52H.

  • Page 16: Turning On Power

    Using Extension Mode ※ Using the Extension Mode, W52H automatically shuts down the radio wave after issuing the Low Battery Alert. This is quite a useful function that you can still check outgoing/incoming records, content of e-mail, address book, schedule and so on when necessary. In this case, you can only use the functions which needs no radio wave.

  • Page 17: Security Code And Passwords

    Security Code and Passwords The W52H lets you use the numbers and passwords described below. Be sure to take steps so you do not to forget your numbers and passwords. You will need them to perform various operations and to access subscription services.

  • Page 18: Selecting English As The Display Language

    Selecting English as the Display Language While the standby screen is displayed, press c. Use a to select “機能設定” (Settings), and then press c (OK). Press 3 (画面表示/照明) (Screen Setup/Display Lighting).

  • Page 19

    5 (Set Language). 2 (English). This selects English as the display language. Even if English is selected as the display language, schedule and other dates are displayed in the format year/month/day. Folder names inside of the Data Folder are also displayed in year/month/day format.

  • Page 20: Operation Basics

    0 will display key help. ◎Holding down c/v for about one second toggles side key’s disabling feature on and off while W52H is folded. To cancel the side key’s disabling feature, follow the above procedure with W52H unfolded.

  • Page 21: Display Indicators

    Selects the user defined icons such as calculator, Mobile Dictionary, Emission Off Mode, Mode " Settings, Extension Mode, and Note Pad 01 6# 7 ! “ ” (information from Hitachi), 日立製作所からのご案内 etc. by pressing d and a. Easy Voice Memo on Manner Mode on Sub display...

  • Page 22: Main Menu

    Main Menu Pressing c while the standby screen is displayed displays the main menu. Use a to select the icon, and then press c (OK) to access the function associated with the icon. Camera TV/Radio microSD Menu Touch Message Data Folder EZ FeliCa Menu W-Scene Settings Function/Setup...

  • Page 23: Using Menus

    ■ Using Soft Keys Soft keys are the keys you use to execute the functions along with the bottom of the screen. The table below explains how to assign the soft keys to the on-screen functions. Note that the function of each soft key depends on the currently displayed screen.

  • Page 24: Viewfinder Position And Self-portrait Position

    W52H display facing toward you. Viewfinder position ● Viewfinder position refers to the position with your W52H closed and its display turned over. In Viewfinder position, you can use side keys ((, h, v, b) to operate your W52H. You can also take photos using W52H as a Viewfinder (digital camera-like).

  • Page 25: Basic Operations In Viewfinder Position

    Basic Operations in Viewfinder Position In Viewfinder position, you can use side keys ( ( , h, v, b) to play songs listed with au Music Player and read the data. For key operations in Viewfinder position, you can use h instead of j or use v instead of c .

  • Page 26: Using The Main Menu (viewfinder)

    Using the Main Menu (Viewfinder) Pressing v on the Viewfinder while the standby screen is displayed will display a special Viewfinder Main Menu. Use h to select the item you want, and then press v (OK) to access the function associated with the icon. EZ Television (1Seg) Music Digital Radio...

  • Page 27: Initializing E-mail And Ezweb

    Initializing E-mail and EZweb An EZweb subscription is required to use e-mail, EZweb or other EZ services. If you did not subscribe when you purchased your phone, contact your nearest au shop or the au Customer Service Center. ※You will be assigned an e-mail address automatically when you perform the EZweb initialization procedure.

  • Page 28: Looking Up Your Current Phone Number And E-mail Address

    Looking Up My phone number and Your Current Phone mail address Number and E-mail Address While the standby screen is displayed, press c. Use a to select “Settings,” and then press c (OK). Press 0 (Profile). Your current phone number and e-mail address appear.

  • Page 29: Changing Your E-mail Address

    Changing Your E-mail Address E-mail address △△△ @ezweb.ne.jp Part you can change Domain name While the standby screen is displayed, press L. Press 0 (E-Mail Setup). Press 7 (Other Setup). When the EZweb connection confirmation screen appears, press 1 (Yes). Press 1 (E メールアドレ...

  • Page 30

    Enter your Security Code, press c (OK), use j to select “ 送信 ” (Send), and then press c (Select). Use j to select “ 承諾す る ” (Accept), and then press c (Select). Use j to select the text box, and then press c (Edit).

  • Page 31: Phone Call

    Phone Call Making a Call While the standby screen is displayed, use the number keys (0 to 9) of the keypad to enter the phone number you want to call. When calling a standard phone, you need to enter the area code. Press N.

  • Page 32: Making An International Call

    Making an International Call ■ au International Call Service Available without any additional application Ex: To call 212-123- △△△△ in the USA 005345 Press N. △△△△ Area code International access code Country code (USA) Phone number • Calling charges for this service are added to monthly mobile phone calling charges and billed together.

  • Page 33: Answering A Call

    Answering a Call Press N to answer an incoming call. After you finish a call, press F to hang up. Display for Incoming Calls If the caller’s name is in your address book, it appears on the XXXX display. If not, only the caller’s phone number is displayed. A message appears when the phone number of the caller is not provided for some reason.

  • Page 34: Redialing (outgoing Records/incoming Records)

    Redialing (Outgoing Records/ Incoming Records) While the standby screen is displayed, press s. r : Displays outgoing records. l : Displays incoming records. Use j to select the record whose number you want to dial, and then press N. The phone stores up to 50 records each for the outgoing records and incoming records.

  • Page 35: Changing The Ring Tone

    Changing the Ring Tone While the standby screen is displayed, press c. Use a to select “Settings,” and then press c (OK). Press 2 (Sound/Vib/LED). Press 1 (Incoming Call). Continued on the next page...

  • Page 36

    Press 2 (Melody). Press 1 (Fixed Sound). To hear the currently selected ring tone, press % (Check). Use j to select the ring tone you want, and then press c (OK). The ring tone is set. The initial setting is “Fixed Tone1.” ◎...

  • Page 37: Adjusting The Ring Tone Volume

    Adjusting the Ring Tone Volume To adjust the ring tone volume, perform steps 1 through 3 under “Changing the Ring Tone” (page 33), and then continue with the following steps. Press 1 (Incoming Call). Press 1 (Volume). To hear the ring tone at the current volume setting, press % (Play).

  • Page 38: Adjusting The Earpiece Volume During A Call

    Adjusting the Earpiece Volume during a Call During a call, use j to adjust the volume. u : Increases volume. d : Decreases volume. You can adjust the earpiece volume (level 1-6). When you set the maximum volume, is displayed on the screen. Turning On Manner Mode While Manner Mode is set to on, the phone alerts you to incoming calls by vibrating.

  • Page 39: Turning On Easy Voice Memo

    Turning On Easy Voice Memo While the standby screen is displayed, hold down C for about one second. This turns on Easy Voice Memo, the icon appears on the display while Easy Voice Memo is turned on. You can use Easy Voice Memos (up to 4 memos), and each memo can contain up to 20 seconds recording time.

  • Page 40: Playing An Easy Voice Memo

    Playing an Easy Voice Memo When there is a recorded Easy Voice Memos The message “ Call” and “ EasyVoiceMemo” appear on the standby screen. Select “ Call,” and then press c (OK). The incoming records list appears. Use j to select the record with the icon, and then press c (Disp).

  • Page 41: Inputting Characters

    Inputting Characters Input characters using keypad keys 0 through 9. The table below shows the characters each key cycles through when you press it. Number of Presses # + , ^ ; < = > $ ¥ % & [ ] ’ ` {   } ˝ Space 0 .

  • Page 42: Inputting An E-mail Address

    Inputting an E-mail Address ■ Inputting “mark@ezweb.ne.jp” In this example, we will input “mark@ezweb.ne.jp” for “<E-Mail Add1>.” To input “<E-Mail Add1>,” perform steps 1 through 6 under “Registering an Address Book” (page 43), and then perform the following steps. Input “mark.” To input “m”: Press 6 once.

  • Page 43: Inputting Pictographs And Useful Sentences

    Inputting Pictographs and Useful Sentences The following procedure shows how to input pictographs and useful sentences into the body text when creating a new e-mail message. Press % (Char), and then (Pictograph). You can also select a pictograph by pressing #. Use a to select the pictograph you want, and then press c (Select).

  • Page 44

    Use j to select the useful sentence you want, and then press c (OK). Here we will select “Happy birthday!” You can also input “Happy birthday!” by pressing 17.

  • Page 45: Address Book

    Address Book Registering an Address Book While the standby screen is displayed, hold down & for about one second. <Name>,” and Select “ then press c (Edit). Enter the name, and then press c (OK). <Reading> is generated automatically when you enter a name. To input text →...

  • Page 46

    Enter the phone number, and then press c (OK). When entering the number of a standard phone, be sure to include the area code. Use j to select <E-Mail Add1>,” and “ then press c (Edit). If you do not want to enter an e-mail address, jump to step 8.

  • Page 47: Editing An Address Book Record

    Editing an Address Address Birthday Book Record Group Example: To edit the phone number of “Tom Carter” While the standby screen is displayed, press &, use a to select the record you want to edit, and then press & (Menu). Press 3 (Modify), and then 1 (Overwrite).

  • Page 48: Adding Outgoing Or Incoming Record Data To The Address Book

    Adding Outgoing or Incoming Record Data to the Address Book While the standby screen is displayed, press s, use j to select the phone number you want to save, and then press & (Menu). r: Displays outgoing records. l: Displays incoming records. Press 4 (Reg Add Book).

  • Page 49: Dialing From The Address Book

    Dialing from the Address Book While the standby screen is displayed, press &, and then use a to select the record whose phone number you want to dial. Press c (Disp). The details screen of the record appears. Use j to select the phone number, and then press N.

  • Page 50: Pair Function

    Pair Function You can save up to five phone numbers (like frequently used ones from the address book). You can make calls or send mails to these saved numbers (called Pair Partners) more easily. Registering a Pair Partner While the standby screen is displayed, press N.

  • Page 51: Making A Phone Call Or Sending Mail To A Pair Partner

    Making a Phone Call or Sending Mail to a Pair Partner While the standby screen is displayed, press N. Use s to select the Pair Partner. Use j to select “Call,” and then press c (OK). Sending E-mail: After selecting “Send E-Mail” and then pressing c (OK), selecting “Create New”...

  • Page 52: Mail

    Mail EZweb subscription required Your W52H supports two types of mail: e-mail and C-mail. Using E-mail To use e-mail, you need to subscribe to an EZweb service. If you did not subscribe when you purchased your phone, contact your nearest au shop or the au Customer Service Center.

  • Page 53: Using C-mail

    Using C-mail C-mail lets you exchange text messages that contain up to 50 double-byte characters (100 single-byte characters) with another au cellphone that supports C-mails. Page C-mail Center C-mail Center C-mail Center C-mail Center C-mail Center C-mail Center Sent using a phone number. Example: 090-0001-XXXX Received using a phone number.

  • Page 54: Creating And Sending E-mail Messages

    Creating and Sending E-mail Messages While the standby screen is displayed, press L, and then press 1 (Create New). Select , and then press c (Edit). : Address to which the e-mail will be sent. You can send an e-mail up to five addressees at a time.

  • Page 55

    Use j to select , and then press c (Edit). : Subject of the e-mail message. Enter the subject, and then press c (OK). Use j to select , and then press c (Edit). : Body of the e-mail message. Enter the body text, and then press c (OK).

  • Page 56: Reading Received E-mail Messages

    Reading Received E-mail Messages When you receive an e-mail The message “ E-Mail” and Received appear on the standby screen. e-mail icon Select “ E-Mail,” and then press c (OK). Press c (OK). : Indicates an unread message. : Indicates an already read message. Use j to select the unread e-mail you want to view, and then press c (Disp).

  • Page 57: Reading An E-mail Message With An Attached Photo

    Reading an E-mail Message with an Attached Photo Use j to select the e-mail message, and then press c (Disp). Use j to select the attached data and then press c (Select). Use j to select a file name, and then press c (Play). ◎...

  • Page 58: Replying To A Received E-mail Message

    Replying to a Received E-mail Message To reply to an e-mail message, perform steps 1 through 3 under “Reading Received E-mail Messages” (page 54), and then perform the following steps. Press % (Reply). is prefixed with “Re:,” and the body text of the e-mail is quoted. Press c (Edit), and then enter the body text.

  • Page 59: Avoiding Spam

    Avoiding Spam It is recommended that you use our mail filter function to block spam. You can use “supportive settings” to easily configure mail filter settings by answering questions that appear on the display. ■ Configuring Mail Filter Settings Example: To access the “ サポート設定 ” (Supportive settings) 1 While the standby screen is displayed, press L.

  • Page 60: Creating And Sending C-mail Messages

    Creating and Sending Hold down C-mail Messages . . . While the standby screen is displayed, hold down L for about one second, and then press 1 (Create New). Select , and then press c (Edit). Press 1 (Address Book), use a to select an addressee, and then press c (Select).

  • Page 61: Reading Received C-mail Messages

    Use j to select , and then press c (Edit). Enter the body text, and then press c (OK). Press % (Send) or N. When the C-mail reaches the other party, the message “Completed.” appears, and the message is stored in your sending records.

  • Page 62: Camera

    Camera The W52H has a 2.1-megapixel camera with approximately 2.07 million effective pixels and powerful functions to support various types of digital imaging. You can attach the photos that you record to e-mail messages. Using the Camera Shooting a Photo (page 62)

  • Page 63

      Auto focus W52H has built-in auto focus function. You can shot photos with the subject properly focused simply by pressing the shutter key. Photo Sizes The following shows the sizes of the photos that can be recorded with your W52H.

  • Page 64: Shooting A Photo

    Shooting a Photo While the standby screen is displayed, press c, use a to select “Camera,” and then press c (OK). Press 1 (Photo), and then point the lens at the subject. Press c (Shutter). The phone emits a shutter sound. Note that the phone emits the shutter sound even if it is in Manner Mode.

  • Page 65: Shooting Photos In Viewfinder Position

    Shooting Photos in Viewfinder Position Perform steps under “Viewfinder Position and Self-portrait Position” (page 22), and then continue with the following steps. Press v while the standby screen is displayed. to select “Photo,” press v (OK), and then point the lens at the subject .

  • Page 66

    Press b (Save). The display shows the message “Saved to data folder (Phone).” and then returns to the photo monitor screen. Photo you shoot are saved to the “Photo Folder,” which is in the Data Folder. If the photo is not what you want to take, press (. Next, repeat step 3 to redo.

  • Page 67: Viewing Photos

    Viewing Photos While the standby screen is displayed, press c, use a to select “Data Folder,” and then press c (OK). Use j to select “Photo Folder,” and then press c (Detail). Selecting “All Data” displays a list of all photos in the “Photo Folder.”...

  • Page 68: Attaching A Photo To An E-mail Message

    Attaching a Photo to an E-mail Message Perform the procedure from step 1 to 3 under “Shooting a Photo” (page 62), and then perform the following steps. Press % (E-Mail), and then press 1 (Attach). Photos you shoot are stored in the “Photo Folder”...

  • Page 69: Ezweb Using Ezweb

    EZweb EZweb subscription required Using EZweb To use EZweb, you need to subscribe to an EZweb beforehand. If you did not subscribe when you purchased your phone, contact your nearest au shop or the au Customer Service Center. In addition to an EZweb subscription, you also need to perform an initialization procedure before you can use EZweb.

  • Page 70: Displaying The Ez Top Menu

    Displaying the EZ Top Menu While the standby screen is displayed, press R, use s to select “EZweb,” and then press 1 (Top Menu). キーワード検索機能 (Search by keyword) Provides information search function by keywords カテゴリで探す (Search by category) Searches for a site by category EZサービスで探す...

  • Page 71: Bookmarking Sites You Frequently Access

    Bookmarking Sites You Bookmark Frequently Access Display favorite sites you want to bookmark, and press & (BrowserMenu). Press 1 (New bookmark). ※ You may not be able to bookmark some sites. Press & (Reg). Use j to select a folder, and then press c (OK).

  • Page 72: Viewing A Bookmarked Site

    Viewing a Bookmarked Site While the standby screen is displayed, press R. Use s to select “EZweb,” and then press 2 (Bookmark(s)). Use j to select a site or folder, and then press c (OK). If you selected a folder, use j to select a site, and then press c (OK).

  • Page 73: Downloading Chaku-uta Chaku-uta-full

    ® Downloading Chaku-Uta ® Chaku-Uta-Full ® ® To download a Chaku-Uta /Chaku-Uta-Full perform step 1 under “Displaying the EZ Top Menu” (page 68), and then perform the following steps. Use j to select “ カテゴリで 探す ” (Search by Category), and then press c (OK).

  • Page 74: Ez Navi

    These functions enable you to check the location of an au cellphone supporting “Security Navi” and receive an alert mail which is sent to a particular au phone whenever another phone enters (or is inside of) or exits (or is outside of) a preset area by operating W52H.

  • Page 75: Ez Navi Walk

    Evacuate Navi You can use the map data stored in the Data Folder of the W52H to locate the nearest refuge shelter or to determine the direction to your home (Evacuate Area Map). You also can access the Evacuate Navi EZweb site to download contents,...

  • Page 76: Au Media Tuner

    au Media Tuner EZweb subscription required au Media Tuner makes it possible to enjoy using EZ Television (1Seg), Digital Radio, and EZ Channel-Plus. au Media Tuner Features With au Media Tuner, you can switch between EZ Television (1Seg), Digital Radio, and EZ Channel-Plus simply by pressing EZ Television (1Seg) Digital Radio...

  • Page 77

    EZweb. ◎You will not be able to view au Media Tuner broadcasts after changing models or on a W52H whose contract has been cancelled. You can use au Media Tuner to play back programs saved in your Data Folder after changing models or canceling your contract.

  • Page 78: Configuring Au Media Tuner Initial Settings

    Configuring au Media Tuner Initial Settings Perform the following procedure before using au Media Tuner for the first time. While the standby screen is displayed, press b. A precaution screen will appear on the display. If you select “OK ( 以後表示しな...

  • Page 79

    Use j to select “OK” and then press c ( 選択 ) (Select). This automatically configures reception area and channel settings and displays the television screen. If you select “OK ( 以降確認しない )” (OK (Do not confirm again.)) above, the transmission confirmation screen will not appear the next time you perform application communication.

  • Page 80: Using Ez Television (1seg)/digital Radio

    Using EZ Television (1Seg)/Digital Radio While the standby screen is displayed, press b . You also need to perform an initialization procedure before you can use au Media Tuner. If you have not performed initialization yet, refer to “Configuring au Media Tuner Initial Settings”...

  • Page 81

    ■ To switch between the earphone and speaker ① On the television operation screen/radio operation screen while au Media Tuner is running, press & ( 機能 ) (Function). ② Use a to select “ 字幕 / 音声 ” (Caption/Sound) and then press c ( 選択 ) (Select).

  • Page 82: Viewing In The Viewfinder Position

    Viewing in the Viewfinder Position When you start up au Media Tuner after configuring initial settings, you will be able to view using the Viewfinder position. You can set the phone onto the desktop holder and view in the Viewfinder position while charging the phone’s battery.

  • Page 83: Simple Mode

    Simple Mode Simple Mode lets you limit operations to the telephone function, address book, camera, e-mail, C-mail, EZweb, and other frequently used functions, which simplifies operations. Entering Simple Mode While the standby screen is displayed, press c, use a to select “Settings,” and then press c (OK).

  • Page 84: Exiting Simple Mode

    Exiting Simple Mode While the standby screen is displayed, press c. Use j to select “Settings,” and then press c (Select). Press * (SimpleModeOFF). Press 1 (Yes). This returns to Usual Mode.

  • Page 85: Using The Simple Mode Main Menu

    Using the Simple Mode Main Menu For composing For using the and reading e-mail address book, and C-mail outgoing records messages, and for and incoming changing e-mail records, and for addresses registering data in the address book For checking the latest news For selecting the information...

  • Page 86: Adding Data To The Address Book In Simple Mode

    Adding Data to the Address Book in Simple Mode While the standby screen is displayed, press &, press 2 (Register), and then press c (Fix). Enter the name, and then press c (OK). To input text → “Inputting Characters” (page 39) Check the reading of the name you inputted, press c (OK), and then press...

  • Page 87

    Press 3 (Input by Myself). You can also select data in sending records or receiving records. To go without saving e-mail address, press 4 (Not Input) and perform step 7. Enter the e-mail address, and then press c (OK). To input an e-mail address →...

  • Page 88: Using The Address Book In Simple Mode

    Using the Address Book in Simple Mode Example: To view a record in address book While the standby screen is displayed, press & , and then press 1 (Look). Use a to select the address book record you want to view, and then press c (Select).

  • Page 89: Creating And Sending E-mail Messages In Simple Mode

    Creating and Sending E-mail Messages in Simple Mode While the standby screen is displayed, press L, 1 (E-Mail), and then 1 (Create Mail). Press 1 (Address Book), use a to select the send destination, and then press c (Select) twice. You can select an addresses from sending/receiving records, or you can manually enter an address.

  • Page 90

    Enter the body text, and then press c (OK). To input text → “Inputting Characters” (page 39) Press 3 (Not Attach). Pressing c (OK) displays a confirmation screen. In case of attaching some data with e-mail, operate the followings. (Data Folder): You can select a photo saved in the Data Folder and attach it to the e- mail message.

  • Page 91: Shooting A Photo In Simple Mode

    Shooting a Photo in Simple Mode While the standby screen is displayed, press c, use j to select “Camera,” and then press c (Select). Press 1 (Photo), and then press 1 (Photo1). Photo1 Wallpaper Photo2 Wide Wallpaper Photo3 Point the lens at the subject, and then press c (Shutter).

  • Page 92: Viewing Photos In Simple Mode

    Viewing Photos in Simple Mode While the standby screen is displayed, press c, use j to select “Data Folder,” and then press c (Select). Press 1 (Data Folder). Use j to select “Photo Folder,” and then press c (Select). Selecting “All Data” displays a list of all photos in the Photo Folder.

  • Page 93

    Use a to select the photo you want to view, and then press c (Menu). Press 1 (Play). The photo appears. 2 (Delete): Deletes data. 3 (Attach E-Mail): Displays a screen for composing an e-mail message with an attachment. To create an e-mail message →...

  • Page 94: Teens Mode

    Teens Mode Teens Mode can be used to block spam, and to block inadvertent access to phone numbers and URLs included inside mail messages. Teens Mode can also be used to restrict call time and the number of sending mail. Using Teens Mode ■...

  • Page 95: Turning On Teens Mode

    Turning on Teens Mode While the standby screen is displayed, press c, use a to select “Settings,” and then press c (OK). Press 5 (User Support), and then 4 (Mode Setup). Press 3 (Teens Mode). Press 1 (SwitchTeensMode), and enter the lock No., and press c (OK).

  • Page 96: Other Functions

    To stop Safety Buzzer, input the lock No., and then press c (OK). ※ You cannot turn off W52H or perform any other operation while the Safety Buzzer is sounding. The Safety Buzzer will continue to sound until you input the lock No. or the battery fully discharges.

  • Page 97: Extension Mode

    ◎The Safety Buzzer will sound through the W52H’s speaker while the Casio round-type earphone jack conversion adapter 02 and the SONY MDR-E0931, Hitachi remote controller microphone 01 (option), flat-type switched earphone microphone (option), or flat-type stereo earphones microphone (option) is connected.

  • Page 98

    In addition to the functions covered in this Basic Manual, your W52H also has the following features. Global Expert Touch Message W52H supports Global Expert based Use FeliCa to send and receive on au IC-Card. address book information, profiles, Global Expert is an international images, and other data.

  • Page 99: Troubleshooting

    ※ If the battery level is very low, “Now loading” is shown on the display, and after a while display disappear. For more detailed information, visit one for the following HITACHI websites. • On your W52H phone, go to http://www.hitachi.co.jp/ez/faq/ (HITACHI Mobilephone Q&A). (Japanese only) • On your computer, go to http://www.hitachi.co.jp/mobilephone/faq/ (HITACHI Mobilephone Q&A). (Japanese only)

  • Page 100: If You Lose Your W52h

    Configuring “Lock by Incoming” settings for Remote Ctrl Lock makes it possible to perform a remote operation that activates Auto Lock and FeliCa lock to lock the W52H. This helps to avoid unauthorized use of your phone and its features.

  • Page 101

    ◎ Remote Ctrl Lock cannot be activated if the W52H is not turned on or if it is outside its service area, or when “Emission OFF” is selected for “Emission OFF Mode (M57).” Also, you may not be able to activate Remote Ctrl Lock while the W52H is in an area when the signal is weak.

  • Page 102

    ■ Using the Security Lock Service to Activate Remote Ctrl Lock With the Security Lock Service, you can activate Auto Lock and FeliCa Lock remotely by placing a call to an au Customer Service Center or with your computer even if your phone is not configured for Lock by Incoming. The Security Lock Service is free.

  • Page 103: Index

    Index Earpiece volume ....... 36 Easy Voice Memo ......37 Deleting ........... 38 Playback ......... 38 Address Book ........43 Turning on ........37 Adding outgoing or incoming record E-mail ..........50 data to the address book ..... 46 Avoiding spam ......... 57 Deleting ...........

  • Page 104

    Soft keys ..........21 SONY MDR-E0931 ......10 Mail ............. 50 Spam ..........5, 57 C-mail ..........51 Standby screen ......... 14 E-mail ..........50 Mail filter ........5, 57 Main menu ......20, 24, 83 Teens Mode ........92 Making a call ........

  • Page 105

    "157" on your au cellphone. Sales: KDDI Corporation Read this to access to the Okinawa Cellular Telephone Company au On-Line Manual Manufactured by Hitachi, Ltd. Cellphone and PHS operators collect and recycle unused telephones, batteries and battery chargers at stores bearing the MN6360YAA-1...

Comments to this Manuals

Symbols: 0
Latest comments: