If You Lose Your H001 - Hitachi Wooo H001 User Manual

If you lose your H001

Confi guring settings for Remote Ctrl Lock makes it possible to perform
a remote operation that activates Auto Lock, FeliCa Lock and Address
Book Lock to lock the H001. This helps to avoid unauthorized use of
your phone and its features.
■ Confi guring Operating Environment Settings for Remote
Ctrl Lock
Repeatedly calling the H001 from a pre-registered telephone number a specifi ed number
of times within a specifi ed amount of time will activate Auto Lock, FeliCa Lock and
Address Book Lock.
While the standby screen is displayed,
press c414, input the lock No.,
and then press c (OK).
Press 1 (Valid No.), use j to select
"Register New," and press c (Select). Enter
the phone number and press % (Comp).
You can enter the caller ID number by selecting from the address book, outgoing
histories, incoming histories, sent histories, received histories, memo, profi le,
payphone. Otherwise, you can enter the number directly.
Press 2 (Duration (min)), input the
period you want to specify, and then
press c (Set).
You can set the time period (the time intervals from the fi rst call
to the last call you should make to activate Remote Ctrl Lock).
You can set the time period between 1 to 10 minutes.
Press 3 (No. of Incm), input the
number of calls you want to specify, and
then press c (Set).
You can set how many times you should repeat making a call to
activate Remote Ctrl Lock. You can set it from 3 to 10 calls.
90
Continued on the next page