Table of Contents
Advertisement
EZ News EX
Use the EZ News EX to display on the standby screen the
latest news, weather forecast, horoscope and others that are
delivered free of packet communication charges. You can
view detailed information on a news item or weather forecast
by selecting the ticker field or info pane.
To make all the EZ News EX services available to you,
you need to fill out a separate application form (and pay
information charges).
You can use the EZ News EX by making a few simple settings
following the EZweb initial setup.
Basic Operations
When the standby screen is displayed, press
u to select the ticker field.
You can view detailed information on a news item or
weather forecast.
•
You can also select the info pane.
•
The EZ News EX information is automatically
received at no charge. Note, however, that packet
communication charges may be incurred for manual
updates and connecting to EZweb sites. In this case,
a confirmation screen for network connection is
displayed.
•
The EZ News EX information is updated at regular time
intervals.
appears while receiving information.
44
Setting EZ News EX
EZweb Subscription Required
EZweb Subscription Required
The EZ News EX is available free of charge. You have only
to make a few simple settings. After following the procedure
in "Initial Setup of E-mail and EZweb" on page 16, configure
EZ News EX settings. If you did not configure the EZ News
EX settings at the time of the initial setup, follow the steps
below.
When the standby screen is displayed, select the
ticker field and then press c (OK).
➡
Follow the on-screen instructions.
The setup procedure is completed.
•
When the standby screen returns, a message asking
you to wait for a while until the next update takes place
appears in the ticker field.
Canceling EZ News EX
■
When the standby screen is displayed, select the
ticker field and then press c (News).
Press % (サブメニュー [Submenu]), use j
➡
to select サービス利用設定変更・解除 (Service
Settings/Cancellation) and then press c (選択
[Select]).
Use j to select サービス利用解除 (Service
➡
Cancellation) and then press c (選択 [Select]).
➡
Follow the on-screen instructions.
Advertisement
Table of Contents
