Siemens SINAMICS G120 Hardware Installation Manual page 83

The following applies when using a sine-wave filter:
● Operation is only permissible with pulse frequencies from 4 kHz to 8 kHz.
● The inverter power is reduced by 5%.
● The maximum output frequency of the inverter is 150 Hz at 380 V to 480 V.
● Operation and commissioning may only be performed with the motor connected, as the
sine-wave filter is not no-load proof.
● An output reactor is superfluous.
Sine-wave filter - design 1
Figure 8-1
Figure 8-2
Table 8-1
Sine-wave filter
6SL3202-0AE26-2SA0
6SL3202-0AE28-8SA0
6SL3202-0AE31-5SA0
6SL3202-0AE31-8SA0
Power Module PM230, IP20 / Push-through technology (PT)
Hardware Installation Manual, 08/2016, A5E34331322B AB
Dimensions and drilling patterns
Mounting position
Dimensions and weights
Overall dimensions
(mm)
W H
250 315
275 368
350 440
350 468
Drilling dimensions (mm) Fixing/torque
D b t1
262 230 127
275 250 132 100.5
305 320 156.5
305 320 156.5
Spare parts and accessories
8.3 Optional accessories
Weight
(Nm) (kg)
t2
90.5 4 x M6 / 7
4 x M8 / 13
113 4 x M8 / 13
113 4 x M8 / 13
34
45
63
80
83