Device Structure - Huawei AP7050DE Hardware Installation And Maintenance Manual

AP7050DE
Hardware Installation and Maintenance Guide

1.1 Device Structure

Figure 1-1
Figure 1-1 Appearance of the AP7050DE
Table 1-1
Table 1-1 Descriptions of interfaces
No.
1
2
3
4
5
6
7
Issue 01 (2016-04-15)
shows the appearance of the AP7050DE.
1 2 3 4
describes interfaces on the AP7050DE.
Name
Default
USB port
Console
Ground screw
GE1
GE0/PoE
DC 12V
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 7 8
5
Description
Reset button: restores factory settings and restarts the
device if you hold down the button more than 3 seconds.
Connects to a USB flash drive or other storage devices to
extend the storage space of the AP. The USB port complies
with the USB 2.0 specification.
Connects to a maintenance terminal for AP configuration
and management.
Connects the AP to a ground cable.
10/100/1000M port: connects to the wired Ethernet.
10/100/1000M port: connects to the wired Ethernet. The
port can connect to a PoE power supply device to provide
power for APs.
Connects to PoE or DC power supply.
NOTE
When the AP uses the DC power supply, use a power adapter for
power supply; otherwise, the AP may be damaged.
1 Product Overview
2