Specifications; Product Specifications; Table 2-1. Product Specifications - Blink IQ 200 Instruction Manual

Charge on.

2 Specifications

2.1 Product Specifications

Item
Input Rating
Power Input
Connections
& Wiring
Standby
Power
Onput Rating
Power Output
Cold-Load
Pickup
Internal
Residual
Current
Detection
Upstream
Protection
Breaker
Plug-Out
Protection
Electrical
Protection
Local Area
Network
(LAN)
Wireless
Local Area
Communication
Network
(WLAN/
WiFi)
Cellullar

Table 2-1. Product Specifications.

Kiosk Advanced (80A)
120/208/240 V~, 208/240 V~, single phase, 60 Hz.
single phase, 60
Hz.
0.22 A maximum. 80 A maximum.
Uncorded, Hard-Wired, L1, L2, and GND.
< 10 W. < 10 W.
120/208/240 V~, 208/240 V~, single phase, 60 Hz.
single phase, 60
Hz.
No output. 80 A maximum,
19.2 kW maximum.
Randomized delay between 120 and 720 seconds before charge resume after a power
failure.
CCID 20, 20 mA CCID per UL 2231, Automatic and Manual Reset Feature.
2-pole 100 A (max.) breaker on dedicated circuit, Non-GFCI type.
Power output is de-energized when a charging connector is disconnected from an EV.
Over Current, Short Circuit, Over Voltage, Under Voltage, Ground Fault,
Surge Protection, Over Temperature.
10/100 Base T Ethernet LAN.
802.11 b/g/n
CDMA/UMTS Cellular.
Specification
Smart
< 5 W.
None.
Advanced (32A)
32 A maximum.
< 10 W.
32 A maximum,
7.68 kW maximum.
CDMA/UMTS
Cellular.
5