Configuration - Blink IQ 200 Instruction Manual

Charge on.

4.3 Configuration

4.3.1 Factory Settings
Clicking on the "Configuration" and then "Factory Settings" link will bring up the
following screen:
Charge Point Vendor
Charge Point Model
Charge Point Serial
Hardware Version
Firmware Version
Production Date
Number Of
Connectors
Connector Type
Max Amperage
Connector
Protocol Name
The name of the charge point vendor.
The model of the charge point.
The unique serial number of the charge point.
The hardware version of the charge point.
The software version of the charge point.
The date when the charge point is made.
Number of connectors of the charge point.
Type of the output cable connector.
The maximum current output for the charge
point.
The communication protocol between charge point and
BOS.
21