Blink IQ 200 Instruction Manual page 30

Charge on.
4.3.3 OCPP Settings
Clicking on the "Configuration" and then "OCPP Settings" link will bring up the following
screen:
Group Primary Serial ID
PWM Amperage
Real Amperage
Latitude
Longitude
Ventilation Area
Max Amperage Grid Connection
Reservation Supported
Member Price Scheme ID
Non Member Price Scheme ID
26
The charge box serial number of Primary in the group if
it's LLM enabled.
The amperage used by PWM shown to EV.
The real-time measured amperage of charger.
Latitude of the location.
Longitude of the location.
Show if charge point installed in ventilation required area.
Maximum current of the input power source grid.
If true, Charge Point will support reservation related messages from
Central System.
The default price scheme ID will be used for Blink members when a
Charge Point is offline.
The default price scheme ID will be used for NON Blink members
when a Charge Point is offline.