Table of Contents

Advertisement

Troubleshooting

Troubleshooting
Problem
The power does not
The fuse is disconnected.
turn on.
Device is not properly connected.
The system does
The disc has not been inserted or has
not play.
been inserted upside down.
The disc has been contaminated.
The vehicle battery is low.
A disc not supported by the device has
been inserted.
The image colour/
The brightness, saturation, and contrast
tone quality is low.
levels are not set properly.
Sound does not
The volume level is set to the lowest
work.
level.
The connection is not proper.
The device is currently fast-forwarding,
rewinding, scanning, or playing in slow
mode.
Possible Cause
• Replace with a suitable fuse.
• If the fuse is disconnected again, please contact your point of purchase or service
center.
Check to see that the device has been properly connected.
Insert the disc properly so that the sides are facing the correct direct.
Wipe away dirt and other foreign substances from the disc.
Charge the battery if the problem persists, contact your point of purchase or service
center.
Insert a disc which is supported by the device.
Properly adjust the brightness, saturation, and contrast levels through Display
Setup.
Adjust the volume level.
Check to see that the device has been properly connected.
The sound will not work when the device is fast-forwarding, rewinding, scanning, or
playing in slow mode.
Countermeasure
76

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lnn2010ewum

Table of Contents