Kia LNN2010IWUM Owner's Manual page 77

Troubleshooting
Problem
The sound or image The disc is dirty or scratched.
quality is low.
Vibration is occurring from where the
conversion switch has been installed.
Image colour/tone quality is low.
The USB does not USB memory is damaged.
work
USB memory has been contaminated.
A separately purchased USB HUB is being
used.
A USB extension cable is being used.
A USB which is not a Metal Cover Type USB
Memory is being used.
An HDD type, CF, SD Memory is being used.
There are no music fi les which can be played.
The iPod is not There are no titles which can be played.
recognized even
The iPod fi rmware version has not been
though it has been
properly updated.
connected
The iPod devie does not recognize downloads. Reset the iPod and reconnect with the device.
Possible Cause
Wipe off water or dirt from the disc. Do not use a disc which has been
scratched.
The sound may be short circuited and the image distorted if the device
vibrates.
The device will return to normal once vibrations stop.
Please use after formatting the USB into FAT 12/16/32 format.
Remove any foreign substances on the contact surface of the USB memory
and multimedia terminal.
Directly connect the USB memory with the multimedia terminal on the
vehicle.
Directly connect the USB memory with the multimedia terminal on the
vehicle.
Use standard USB Memory.
Use standard USB Memory.
Only MP3, WMA fi le formats are supported. Please use only the supported
music fi le formats.
Use iTunes to download and save MP3 fi les into the iPod.
Use iTunes to update the fi rmware version and reconnect the iPod with the
device.
77
Countermeasure