Site Location; Media Identification - En-Vision America ScripTalk 220-SN User Manual

2.1 – SITE LOCATION
Consider the following when setting up the printer:

Place the printer on a solid flat surface with adequate space.
Make sure there is enough space above the printer to provide
clearance for the top cover to swing open.

Place it away from hazardous materials or dusty environments.

Place it within operational distance of the host computer, within
interface cable specifications.
2.2 – MEDIA IDENTIFICATION
The ScripTalk Printer 220-SN requires specific label stock that can only
be purchased from En-Vision America. If you need more labels, have
your purchasing agent fax a PO to 309-452-3643 for the following:
00210-10K-0250
The back of a ScripTalk Label will look similar to the one below. Over
time, some details have varied, but the metallic "race track" antenna
has always been a feature:
ScripTalk Labels, 10K, 250/roll
- 8 -