Mechanical design
Setting and operating
elements
Legend
Building Technologies
HVAC Products
The controller consists of 2 parts:
• Plastic housing which accommodates the electronics, the operating elements and the
built-in room temperature sensor
• Mounting base
The housing engages in the mounting base and snaps on.
The base carries the screw terminals.
3
1
2
AUTO
4
5
15
14
1
Display of the room temperature, setpoints and control parameters
2
Symbol used when displaying the current room temperature
3
Weekday 1..7 (1 = Monday / 7 = Sunday)
4
Current time of day
5
Standby / fan mode status
Standby mode
Auto fan active
AUTO
fan speed low, medium, high
6
in cooling mode
in heating mode
7
Auto Timer mode
AUTO
Normal operation
Energy Saving mode
8
Buttons for adjusting the setpoints, control parameters and time of day
9
Button for changing fan operation and Standby (
10 Button operating mode (
11 Button for setting time of day and weekday ( )
12 Manual heating / cooling changeover (
13 Auto timer program (
14 Confirmation ( )
15 Infrared receiver (only with RDF210.../IR)
Room Temperature Controllers
AM
PM
$
: Normal operation / Auto Timer mode
)
AUTO
) (only with RDF210.2)
)
AUTO
6
8
7
9
10
11
12
13
)
11/15
N3058en
10.01.2006