Switching The Power On Or Off - HTC U11 User Manual

28 Unboxing and setup
Cleaning and drying
If HTC U11 has had contact with salt water, liquid chemicals, dust, or other contaminants,
immediately rinse the phone. When the phone is wet, make sure to dry it thoroughly.
§ To avoid damaging HTC U11, do not charge the phone when contaminants are present or the
USB port is not completely dry. In these circumstances, do not connect any external device.
§ The sound volume of the earpiece, speakers, and microphone may be less audible if these parts
are not dried well.
Rinsing
1. Before rinsing, make sure the nano SIM/microSD slot is covered and closed tightly. See
nano SIM card on page 20 and
2. Rinse the phone using fresh water. Rinse by hand only. Don't use a brush or sponge.
While rinsing, do not press on the tray to avoid having gaps around the card slot which may
allow water to enter the phone.
Drying
1. Gently wipe off the water from the phone with a clean, dry cloth. Don't use cotton swabs to
wipe the earpiece, speakers, microphone, and connection port.
2. The display may not respond accurately to touch gestures when it's wet. For the touch screen
and lenses, wipe with a soft dry cloth such as a microfiber cloth that will not scratch the
surface.
3. Leave the phone at room temperature for 3 hours or so to let it dry completely. If buttons and
any connection port such as the USB port are still wet, make sure to let them dry completely
before you use the phone.
If condensation forms inside the display such as when there's a drastic change in temperature, place
the phone at room temperature until condensation disappears.

Switching the power on or off

Switching the power on
Press the POWER button until HTC U11 vibrates.
When you turn on HTC U11 for the first time, you'll need to set it up.
Storage card on page 23.