Advertisement
Quick Links
Technical Information
Brushcutter STIHL FS 90, 100, 110, 130
KombiEngine STIHL KM 90, 100, 110, 130
Edger FC 90, 95, 100, 110
Pole pruner STIHL HT 100, 101, 130, 131
Hedge trimmer STIHL HL 90 K, 95, 95 K, 100, 100 K
Contents
1. Fuel tank, filler cap, shroud
2. Service information "Fuel tank, filler cap"
3. Throttle cable, tensioner, spacer flange
4. Ignition module
5. Fan housing
6. Drive shaft, flexible liner
7. Chapter "Fueling" in the Instruction Manual
8. Summary
1.
Fuel tank, filler cap, shroud
1.1
Fuel tank 18 oz. (0.53 l), filler cap
The previous fuel tanks 4180 350 0424 and
4180 350 0425 are being replaced by the version
4180 350 0432.
At the same time, the previous toolless filler cap
0000 350 0535 is being replaced by the threaded
filler cap 0000 350 0517.
TI_10_2011_30_01_01.fm
STIH)
10.2011
– Series 4180
– Series 4180
– Series 4180
– Series 4182
– Series 4280
englisch / English
Advertisement
Related Manuals for Stihl HL 90 K
Summary of Contents for Stihl HL 90 K
-
Page 1: Technical Information
Edger FC 90, 95, 100, 110 – Series 4180 Pole pruner STIHL HT 100, 101, 130, 131 – Series 4182 Hedge trimmer STIHL HL 90 K, 95, 95 K, 100, 100 K – Series 4280 Contents 1. Fuel tank, filler cap, shroud 2. - Page 2 Page 2 Technical Information 10.2011 Shroud, pictogram The previous shroud 4180 080 1604 with pictogram 0000 967 3605 is being replaced by the shroud 4180 080 1605. The new shroud includes the previous pictogram 0000 967 3605, the new pictograms 0000 967 7222 and 0000 967 4055. 1.2.1 Spare parts Only the new shroud is still available as a spare part.
- Page 3 Technical Information 10.2011 Page 3 Throttle cable, tensioner, spacer Tank filler cap/pictogram combinations flange Throttle cable, tensioner The previous throttle cables are being replaced by the new versions with an extended plastic tube for the wire core. – Toolless filler cap 0000 350 0535 –...
- Page 4 Page 4 Technical Information 10.2011 3.1.1 Characteristics for differentiating Spacer flange between tensioners Parallel to the new throttle cables, the gap for routing of the throttle cable has been enlarged on spacer flange 4180 120 2303. The part number of the spacer flange remains unchanged.
- Page 5 Technical Information 10.2011 Page 5 Ignition module Permissible cylinder/washer/ignition module combinations The previous ignition module 4180 400 1300 is being replaced by the version 4180 400 1308. Spare parts From now on, only the new ignition module will be available as a spare part. The new ignition module can also be used with older machines.
- Page 6 Page 6 Technical Information 10.2011 Fan housing Drive shaft, flexible liner Only for machines with a polymer fan housing. Only for FS 100 RX, FS 110 X and FS 110 RX The previous lightweight drive shaft 4137 710 3202 and flexible liner 4134 711 7301 are being replaced by the flexible drive shaft 4137 711 3202 and the flexible liner 4137 711 7300.
- Page 7 Technical Information 10.2011 Page 7 Chapter "Fueling" in the Instruction Manual The following sections replace the corresponding sections in the chapter "Fueling" in the Instruction Manual. Opening the threaded filler cap Turn the cap counterclockwise until it can be removed from the tank opening Remove the filler cap Refueling Take care not to spill fuel while fueling and do not...
- Page 8 1) Previous version of part no longer available from factory 2) Previous version of part remains available for older models 3) New version of part can also be used for older machines 4) see “Service Notes” © ANDREAS STIHL AG & Co. KG, 2011 Technical Documentation D1/MTK-bl TI_10_2011_30_01_01.fm...