ADT PM33 Quick Reference Manual page 7

Step 3. ENROLL NOW or
ENTR ID:xxx-xxxx
Step 4. DEVICE ENROLLED
T01:Tag (Prox)
 Return to step 5
Step 5.
DEVICE ENROLLED
T05:Tag (Prox)
 Return to step 2
Step 6. DELETE TAG
 Return to step 3
1 For detailed instructions on how to select User Settings – refer to section A.1 and section A.2.
2 The display shows the first enrolled Tag (Tag No.1) of the 8 PowerMaster-33 G2) tags.
3 To abort enrollment, press the
4 If the tag was previously enrolled in the System, the KP-250 PG2 display indicates this together with the tag's ID number, for
example, "ALREADY ENROLLED T01:Tag (Prox)".
5 If Partition is enabled, continue to step 6.
6 You can now enroll another proximity tag. You can also select another option in the User Settings menu, or quit programming
7 If no proximity tag is enrolled in the System, the display reads [NO EXISTING DEV.].
8 To abort the procedure, press the button.
11 You can now add or delete another proximity tag. You can also select another option in the User Settings menu, or quit
programming
or
button.
Present the proximity tag to the Keypad within the
timeout period.
If enrollment was successfully completed, a "Happy
Tune" ☺ sounds and the display reads [DEVICE
ENROLLED] for a short duration and then changes
to read the tag's details.
The display shows the allocated tag serial No (user
No.), which is always the first free number, for
example: [T01:Tag (Prox)].
To assign the tag to another user, for example,
"User No. 5", key in [05] or alternatively click the
or or button until the display reads
[T05:Tag (Prox)] and then press
The display reads [DEVICE ENROLLED] a "Happy
Tune" ☺ sounds and the display will then change
to [T01:Tag (Prox)].
To delete the tag press the
A "Happy Tune" ☺ sounds and the display reads
[DELETE TAG] and returns to step 3.
7
4
5 6
button.
11
to confirm.