Table of Contents
Advertisement
To Program A User Code
Step 1. RECALL BYPASS
Step 2. User 01: 1111
Step 3. User 06: 0000
Step 4. User 06: 0000
Step 5. User 06: 1234
Return to step 3
1 For detailed instructions on how to select the setting options – Please refer to the manual on the website
2 The display shows the 1st User Code (Master User) in the list of (PowerMaster-33 G2) User Codes. If you have not yet
changed the default code 1111, we recommend that you change it now.
3 a. The display shows the user code currently programmed in this location (e.g. 5327).
b. The cursor blinks on the first digit of the code.
c. If the location is free the display will be (0000).
4 You can move the cursor to the next or previous digit by pressing
digits to the right of the cursor.
5 a. The new code is momentarily displayed without the cursor before reverting to step 3.
b. If Partition is enabled, continue to step 6.
6 You can now repeat steps 3 - 5 to program or edit another user code. To end this session and to select other menu options or
to quit programming.
Enter the [USER SETTINGS] menu, select the
[USER CODES] option and press
The first user code "User 01: 1111" is displayed.
To recall the last used bypass scheme press .
At the blinking cursor position, key in the User
Code you wish to program , for example, [06] for
or
user code 6, or alternatively click the
When the user code you wish to program appears
on the display, press
To program or edit the code, at the blinking cursor
position enter the 4 digit code, for example, "1234",
using the numerical Keypad.
When done, press
A "Happy Tune" ☺sounds. The display confirms
the saved code.
button until the display reads, [User 06: 0000].
5, 6
or
. Pressing
5
3, 4
erases the digit of the cursor + all
1
2
or
Advertisement
Table of Contents
