Table of Contents
Advertisement
To Set Partitions Authorization*
Step 6. User 06: 1234
1
#
Step 7. User 06: 1234
1
Return to step 3
7 This setting can be performed only after completing steps 1 - 5 of page 5
8 At this stage, pressing the
9 You can now repeat steps 3 - 7 to program or edit another user code.
Adding /Deleting Proximity Tags
Users of the alarm System may be provided with a proximity tag/s that can be used
instead of the user codes to perform a variety of functions, for example, arming,
disarming, reading the event log, etc.
Whenever a user code is required you can simply present a valid proximity tag
instead of entering the user code.
♦ Here you can add (enroll) new proximity tags or delete tags as required.
Step 1. TAGS (Proximity)
Step 2. ADD NEW TAG
2 3
2 3
#
button continuously switches between the first and second rows.
The display will now enable you to set the
partitions.
7
#
Press the
button and use the Keypad keys
2
3
to change the status of the partitions 1, 2
& 3, respectively.
When you are satisfied with the setting, for
example, User 6 is authorized with Partition 1 and 3
only, press
A "Happy Tune" ☺sounds. The display confirms
the saved code.
9
Enter the [USER SETTINGS] menu, select the
[TAGS (Proximity)] option and press
The display will read [ADD NEW TAG].
To begin the process of enrolling a new proximity
tag press
6
8
to confirm.
1
.
1
3
Advertisement
Table of Contents
