■
Recalling the memorized position
The driving position will be automatically adjusted to the position
recorded for that button when:
To change the memorized position
■
Adjust the desired positions of the driver' s seat, tilt and telescopic steering
column and outside mirrors.
While pushing the "SET" button, push button "1" or "2" until the signal
beeps.
Retained accessory power
■
Each memorized position (except for the tilt and telescopic steering column) can
be activated within 30 seconds after the corresponding side door is opened, even
after the engine switch OFF.
If any position memory button is pushed while the adjustments are being made
■
The operation will stop. To reactivate the system, push the desired button ("1" or "2")
again.
If the battery is disconnected
■
The computer' s memory will be erased and the memorized positions will have to be
set again.(P.29, P.30)
1-3. Adjustable components (seats, mirrors, steering wheel)
The transmission selector
lever is in the "P" position.
The engine switch is in the
"ON" position.
Pushing button "1" or "2".
1
31