Samsung UbiCell User Manual page 26

Hide thumbs Also See for UbiCell:
Table of Contents

Advertisement

Trouble
The GPS LED still does not light up
blue 10 minutes after plugging-in the
UbiCell
If the above suggestions did not correct the problem, or you encounter a problem that is not listed here,
you can get additional assistance by calling Samsung customer service.
26
_ © SAMSUNG Electronics Co., Ltd.
Solution
- The internal GPS antenna is either unable to obtain or
having difficulty obtaining a GPS signal.
- Move the UbiCell a location with fewer surrounding
obstructions. The new location should be in a more open
area and closer to a window, if possible.
- If relocation does not resolve the issue, detach the GPS
antenna from the UbiCell to use it as an external GPS
antenna.
- Make sure the power is properly configured and securely
connected to the rear of the UbiCell.
- If the preceding fails, remove the power cord from the wall
outlet, and then remove the power supply connector from
PWR connector at the rear of the UbiCell for at least 10
seconds.
- Reconnect the power supply connector to the PWR
connector, plug the power cord into the wall outlet.
This allows the UbiCell to initiate its startup sequence where
it detects the Ethernet connection, GPS signal,
and communication with the system.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Scs-26uc4

Table of Contents