Table of Contents
Advertisement
ALARM MANAGEMENT
ALARM INPUT
The speed dome camera is equipped with six alarm input connectors. These connectors
correspond to both preset positions and auto pan groups.
NOTE: To choose the correspondant funtion (auto pan group / preset position) go to the OSD
of the keyboard and set the function accordingly.
Once the alarm signal is detected the speed dome camera will automatically move to the
preset position or start up the auto pan group. In addition the alarm buzzer and the LED of the
EVENT RESET
button is activated
The keyboard's LCD displays:
The monitor picture displays the message „ALARM". The message disappears as soon as the
position of the dome camera is changed.
NOTE: By activating multiple alarm inputs at the same time the dome camera will move to
the position that is related to the latest activated alarm input.
ALARM OUTPUT
The alarm output (NO/NC) is activated accordingly to the alarm input.
STOP ALARM CONDITION
Stopping the alarm condition (and resetting the alarm output) can be done in two ways.
a) Manualyy by pressing the button
alarm buzzer
will turn off.
b) Automatically after the preset alarm time.
NOTE: Set the alarm time in the keyboard's OSD.
⎡
DEVICE
:
XXX
⎢
⎣
ALARM
INPUT
EVENT RESET
21
⎤
⎥
⎦
(LED is deactivated). Also the
Advertisement
Table of Contents
