Table of Contents
Advertisement
Key in:
0 0 1 AUTO PAN
The keyboard's LCD displays:
The
AUTO PAN
Stop the auto pan function
To stop the auto pan function simply press the button
The LED is not lid.
NOTE: As long as the auto pan function is activated (LED is lid) it is not possible to control
the speed dome manually or choose a different function. Stop the auto pan funtion first.
AUTO FOCUS
The
AUTO FOCUS
automatically focusd when in range. The speed dome camera always focusses on the center
of the picture. Objects which are not in the center may not be focussed and displayed sharp
(especially at a high zoom ratio and a narrow viewing angle). If you want to adjust the focus
manually or to programm a preset position the auto focus function needs to be deactivated
by pressing the
AUTO FOCUS
FOCUS CONTROL
The
FOCUS CONTROL
sharpness of the picture.
NOTE: In cases where also the manual focus does not increase the sharpness of the picture
zoom out and widen the viewing angle. Try to focus again. If you have chosen a very narrow
viewing angle and a high zoom ratio the focus area is only about 0,5m to 1,5m.
IRIS CONTROL
The
IRIS CONTROL
NOTE: The function IRIS CONTROL is only available for the following modes: „auto exposure",
„auto iris" and „manual".
NOTE: The smaller the iris opening, the bigger the focus area. It may happen that under day
light conditions (bright light, small iris opening) the whole picture is displayed sharp. During
night time use or under low light conditions (big iris opening) parts of the choosen picture
(especially in front of and behind the focus point) may not be displayed sharp.
CHANNEL SELECTION
⎡
⎢
⎣
LED is lid.
button activated the auto focus function of the lens. Objects will be
button. (LED is not lid).
is a button that enables the user to manually set the focus and
is a button that enables the user to manually set the iris control.
DEVICE
001
:
AUTOPAN
GROUP
AUTO PAN
19
⎤
⎥
⎦
1 :
again.
Advertisement
Table of Contents
