Table of Contents
Advertisement
Keyboard buttons
SET PRESET
The
SET PRESET
preset positions. To store a current position as preset position follow steps given below:
1. Step: Choose a speed dome camera in which you want to programm a preset position,
e.g. camera 1:
Key in:
0 0 1 ENTER
The keyboards LCD displays:
2. Step: Use the joystick to move the camera to the desired position. Use the zoom and focus
buttons to
individually setup the picture.
NOTE: It is not recommended to use the auto focus function in combination with preset
positions as the camera needs time to focus on the object. It is recommended to set the
focus with the preset position. Simply select and store the focus manually.
3. Step: Key in the number. This number will be stored with the selected preset position. To
store the number, e.g. number 1 and the selected position for this dome press the button
.
SET PRESET
Please enter:
The keyboard's LCD displays:
4. Step: Press
SET PRESET
The keyboard's LCD displays:
NOTE: Each speed dome camera can store up to 128 preset positions. Repeat steps 1 to 4 to
store other positions. Preset positions cannot be individually erased. You have to select and
store a different position for the number to change the selection.
is used to setup individual selected pregrogrammed positions, so called
⎡
⎢
⎣
0 0 1 SET PRESET
⎡
⎢
⎣
again.
⎡
SAVE
⎢
⎣
⎤
DEVICE
001
_ :
⎥
⎦
SAVE
TO
PRESET
XXX
?
⎤
OK!
⎥
⎦
17
⎤
⎥
⎦
Advertisement
Table of Contents
