Fluke 28 II Ex Calibration Information Manual page 3

•
Do not use and disable the Product if it is damaged.
•
Do not use the Product if it operates incorrectly.
•
Do not use the Product in damp or wet environments.
•
Keep fingers behind the finger guards on the probes.
•
Measure for hazardous voltage without the Low-Pass Filter.
To prevent possible damage to the Meter or to the equipment
under test, follow these guidelines:
•
Disconnect circuit power and discharge all high-voltage
capacitors before you do resistance, continuity, diodes, or
capacitance tests.
•
Use the correct terminals, function, and range for all
measurements.
•
Before you measure current, check the fuses of the Meter.
(See Fuse Test.)
WCaution
Digital Multimeter
Safety Information
3