Manually Update Software; Automatically Update Software; Update Software From A Usb Storage Device - Polycom Pano Administrator's Manual

Once you have selected where to download software updates from, you can manually or automatically
update the system.
Related Links
Provisioning Service on page 21
Register with Polycom Cloud Service

Manually Update Software

You can manually update the Pano system software.
Procedure
1. In the system web interface, go to General Settings > Software Update.
2. Select Check for updates.
3. If updates are found, select Update.

Automatically Update Software

You can automatically update the Pano system software.
Note: Automatic software updates are enabled by default when your system is registered to the
Polycom Cloud Service.
Procedure
1. In the system web interface, go to General Settings > Software Update.
2. Select Enable Automatic Updates.
3. Optional: Select Only Check for Updates During Maintenance Hours to specify a range of time
to automatically update the software.
4. Optional: Choose times for Maintenance Hours Begin and Maintenance Hours End.
The system calculates a random time within the defined maintenance window to check for
updates.
Your changes automatically save.

Update Software from a USB Storage Device

You can update the software with a USB storage device by connecting it to the back of the Pano device.
Procedure
1. Obtain the software package you want to install from
2. Save the package to the root directory of a USB storage device.
3. Connect the storage device to the USB 2.0 port on the back of the Pano device (i.e., the top USB
port).
The device detects the USB storage device and displays a prompt on the monitor to confirm that
you want to update the software.
Polycom, Inc.
on page 18
Polycom
System Maintenance
Support.
46