3.0 3508 Controller
Repeat steps 6 to 10 for 4 more segments. Set 'Holdback' to the default 'Off'. Enter the
following parameters and values:
Segment Type Dwell Duration '30:00.0' minutes
Segment Type Step Target SP '600' degrees
Segment Type Dwell Duration '30:00.0' minutes
Segment Type Time Target SP '200' degrees, Duration '2:00:0' hours
Finish the program with an 'End' segment:
11. Press scroll
'End'
12. Press scroll
13. Press page
To run the program either press RUN/HOLD or:
14. Press page
15. Press scroll
16. Press
to select 'Run'.
20
until 'Segment Type' is displayed. Press up
until 'End Type' is displayed. Press up
and scroll
together to return to the home display.
until 'Program Status' is displayed
until the cursor moves to the program status of 'Reset'
or down
to select
or down
to select 'Reset'