Paper Page - GCC Technologies Jaguar J5-61 User Manual

When the job is completed and you untick the Die Cut function, you will be able to adjust the
pen speed, pen force, and offset in the section on the top following normal operating
procedures (see figure 4-21).
Note:
1. The extension of the blade has to be set to cut through both the top layer and the backing
in the very beginning. You then adjust the tool force for the best cutting performance.
2. Once the Die Cut function is activated, it will perform on all the line segments on the
object.
4.7.2 Jaguar V Print Driver setting > Paper Page
Operation
4-14
Jaguar V User Manual