Projecta SC220 Instruction Manual page 7

LOAD MODE SETTING
Operating Steps
Under load mode setting interface, press SET button and hold on for 5 seconds until the
number begins flashing, then press MENU button to set the parameter, press SET button
to confirm.
1** Timer 1
100 Light ON/OFF
101 Load will be on for 1 hour
since sunset
102 Load will be on for 2 hours
since sunset
103–113 Load will be on for 3–13 hours
since sunset
114
Load will be on for 14 hours
since sunset
115 Load will be on for 15 hours
since sunset
116 Test mode
117
Manual mode (Default load ON)
NOTE: Please set Light ON/OFF, Test mode and Manual mode via Timer 1.
Timer 2 will be disabled and display "2 n".
BATTERY TYPE
Operating Steps
Under Battery Voltage interface, press SET button and hold on 5s then enter into the
interface of Battery type setting. After choosing the battery type by pressing MENU button,
waiting for 5s or pressing SET button again to modify successfully.
Battery Type
1. Sealed (AGM)
(default)
NOTE: Please refer to the battery voltage parameters table for the different battery type.
2**
201
202
202–213
214
215
2. GEL
Timer 2
2 n Diabled
Load will be on for 1 hour
before sunrise
Load will be on for 2 hours
before sunrise
Load will be on for 3–13 hours
before sunrise
Load will be on for 14 hours
before sunrise
Load will be on for 15 hours
before sunrise
2 n Disabled
2 n
Disabled
3. FLOODED
7