Appendix
Adding and registering handsets
Your telephone can support up to 12 cordless handsets. The handset must be
registered to the telephone
separately.
The handsets provided within your product box are already registered as
HANDSET 1 and so forth. Additional handsets are assigned numbers in the
sequential order they are registered (up to HANDSET 12).
Register a handset to your telephone base
1. Make sure the handset is out of the telephone base or
charger and shows Put HS on BASE to register before you
begin registration.
2. Put the handset you wish to register on the telephone
base cradle.
3. The screen shows Registering... Please wait and the IN
USE light turns on. It takes up to 90 seconds to complete
registration. Then HANDSET X Registered appears on
the screen, with HANDSET being the handset name and
X being the handset number (1-12). The handset beeps
and the IN USE light turns off. The The handset is now
registered with the telephone base.
If registration fails, Registration failed appears on the
screen. Please start again from Step 1 above.
NOTE: You cannot register a handset if any other system handset is in use.
base before use. You must register each handset
84
Put HS on BASE
to register
Registering...
Please wait
HANDSET X
Registered