AT&T CL83101 User Manual page 73

Answering system
Answering system settings
Call screening
Use this feature to choose whether incoming messages can be heard over
the telephone base speaker when they are being recorded. If you turn call
screening on, you hear the incoming message. While monitoring an incoming
message, you can answer the call by pressing PHONE/
on the handset.
To change the setting:
Using the cordless handset:
1. When the handset is in idle mode, press MENU/
enter the main menu.
2. Press or
CID DIR
press /SELECT.
MENU
3. Press or
CID DIR
press /SELECT.
MENU
4. Press /SELECT to select >Call screening.
MENU
5. Press or
CID DIR
6. Press /SELECT to save the setting. You hear a
MENU
confirmation tone. Press
Using the telephone base:
1. When the telephone base is in idle mode, press MENU/
to enter the main menu.
SELEC
2. Press or
CID DIR
press /SELEC.
MENU
3. Press or
CID DIR
press /SELEC.
MENU
4. Press /SELEC to select >Call screening.
MENU
5. Press or
CID DIR
6. Press /SELEC to save the setting. You hear a
MENU
confirmation tone. Press CANCEL to cancel.
NOTE: For more information on call screening, see page 75.
to scroll to >Answering sys, then
to scroll to >Ans sys setup, then
to choose >On or >Off.
CANCEL to cancel.
OFF/
to scroll to >Answering sys, then
to scroll to >Ans sys setup, then
to choose >On or >Off.
69
or /SPEAKER SPEAKER
FLASH
Answer ON/OFF
>Ans sys setup
to
SELECT
Call screening
>
# of rings
CALL SCREENING
>On
Answer ON/OFF
>Ans sys setup
Call screening
>
# of rings
CALL SCREENING
>On