Maintain The Prism Iii Printer; Overview; Cautionary Information; Preventative Maintenance Schedule - Rimage prism III User Manual

Maintain the Prism III Printer

Use the information in this section to keep your Prism III printer in optimal
operating condition.

Overview

Regular preventative maintenance of your Prism III printer can help to
always produce clearly printed labels. Maintenance
involves cleaning the system.

Cautionary Information

Caution: To avoid damaging the Prism III printer during maintenance:
n
• Never use oils, silicone, or other lubricants on any part of the Prism.
• Use only non-abrasive cleaners to wipe down the surfaces of your
Prism printer.
• Avoid pouring cleaners directly onto the Prism printer. Instead, apply
the cleaner to a lint-free cloth.

Preventative Maintenance Schedule

Use the following table as a guideline for how often to perform preventative
maintenance tasks.
Important! Failure to follow the maintenance schedule outlined to the right
may void your warranty.
2001809_A
SHORT TERM CONFIDENTIAL
For more information visit rimage.com/support
Tools Task Frequency
• Lint-free Clean the Weekly
cloth printer
exterior.
• Non-
abrasive,
all-
purpose
cleaner
• New print Change Monochrome black:
ribbon the print
2100 discs
ribbon.
Monochrome red:
2100 discs
Monochrome blue:
2100 discs
3-color panel (CMY):
500 discs
Print head Clean At every ribbon change
cleaning kit the print or as needed
head.
Instructions
1. Power off the Prism.
2. Disconnect the power
cord.
3. Wipe down the
exterior of the printer.
Refer to the Change the
Print Ribbon
section on
page 18.
Refer to the Clean the
Print Head
section on
page 16.
15