Table of Contents
Advertisement
14
www.electrolux.com
7. CLOCK FUNCTIONS
7.1 Clock functions table
Clock function
00:00
7.2 Setting and changing the
time
After the first connection to the mains,
wait until the display shows
"12:00". "12" flashes.
1. Press
2. Press
the minutes.
The display shows
hour. "00" flashes.
3. Press
minutes.
4. Press
day will be saved automatically after
5 seconds.
The display shows the new time.
To change the time of day press
again and again until the indicator for the
time of day
TIME OF DAY
DURATION
END
TIME DELAY
MINUTE MINDER Use to set a countdown time. This function has no
COUNT UP TIM‐
ER
and
or
to set the hours.
to confirm and switch to set
and the set
or
to set the current
to confirm or the set time of
flashes in the display.
Application
To show or change the time of day. You can change
the time of day only when the appliance is off.
To set how long the appliance operates. Use only
when an oven function is set.
To set when the appliance deactivates. Use only
when an oven function is set.
Combination of DURATION and END function.
effect on the operation of the appliance. You can set
the MINUTE MINDER at any time, also if the appli‐
ance is off.
If you do not set any other clock function the
COUNT UP TIMER automatically monitor how long
the appliance operates.
It is on immediately when the oven starts to heat.
The Count Up Timer cannot be used with the func‐
tions: DURATION, END.
7.3 Setting the DURATION
1. Set an oven function.
2. Press
starts to flash.
3. Press
and then the hours for DURATION
time. Press
When the time ends an acoustic signal
sounds for 2 minutes.
setting flash in the display. The appliance
deactivates automatically.
4. Press any button or open the oven
door to stop the acoustic signal.
5. Turn the knob for the oven functions
to the off position.
7.4 Setting the END
1. Set an oven function.
2. Press
starts to flash.
again and again until
or
to set the minutes
to confirm.
and time
again and again until
Advertisement
Table of Contents
