Installing The Chassis Brackets - Cisco ASR 902 Installation Manual

Installing the Chassis Brackets

Installing the Chassis Brackets
The chassis is shipped with mounting brackets that can be installed on the front or rear of the chassis. To
install the brackets on the front of the chassis, perform these steps:
Step 1 Remove the rack-mount brackets from the accessory kit and position them beside the router chassis.
The figure below shows how to attach the brackets on the Cisco ASR 902 Router for a 19-inch EIA rack.
Figure 1: Attaching Mounting Brackets for a 19-inch EIA Rack
The figure below shows how to attach the brackets on the Cisco ASR 902 Router for a 300-mm ETSI cabinet.
Figure 2: Attaching Mounting Brackets for a 300-mm ETSI Cabinet
Cisco ASR 902 and ASR 902U Aggregation Services Router Hardware Installation Guide
2
Installing the Cisco ASR 902 Router