Installing The Router In A Rack; Installing The Chassis Brackets - Cisco ASR 903 Quick Start Manual

Note For information about supported interface modules, see the Release Notes for the Cisco ASR 903 Series
Aggregation Services Router.

Installing the Router in a Rack

The following sections describe how to install the Cisco ASR 903 Router in a rack:

Installing the Chassis Brackets

The chassis is shipped with mounting brackets that can be installed on the front or rear of the chassis. To install the brackets on the
front of the chassis, perform these steps:
Procedure
Step 1
Remove the rack-mount brackets from the accessory kit and position them beside the router chassis. The figure below
hows how to attach the brackets on the Cisco ASR 903 Router for a 19-inch EIA rack.
Figure 2: Attaching Mounting Brackets for a 19-inch EIA Rack
7