Display Settings - Kenwood KDC-220UI Instruction Manual

AUDIO SETTINGS
VOLUME OFFSET For AUX: –8 to +8 (0) ; For other sources: –8 to 0: Preset the initial
volume level of each source. (Before adjustment, select the source
you want to adjust.)
SOUND RECNSTR ON: Creates realistic sound by compensating the high-frequency
(Sound reconstruction) components and restoring the rise-time of the waveform that are
lost in audio data compression. ; OFF: Cancels.
• [SUB-W LEVEL]/[SUBWOOFER SET]/[LPF SUBWOOFER]/[SUB-W PHASE] is
selectable only if [SWITCH PREOUT] is set to [SUBWOOFER] or [SUB-W]. ( 5)
• [SUB-W LEVEL]/[LPF SUBWOOFER]/[SUB-W PHASE] is selectable only if
[SUBWOOFER SET] is set to [ON]. ( 11)
12
ENGLISH

DISPLAY SETTINGS

Zone identification for color and brightness settings
Zone identification for brightness settings
Set the dimmer
Press and hold DISP to turn on or off the dimmer.
• If you have set [DIMMER TIME] ( 13), it will be canceled once you press
and hold this button.
Other settings
1 Press the volume knob to enter [FUNCTION].
2 Turn the volume knob to select an item ( 13), then press the knob.
3 Repeat step 2 until the desired item is selected/activated or follow
the instructions stated on the selected item.
4
Press and hold to exit.
To return to the previous setting item, press .