Initial Settings - Kenwood KDC-X8019BT Instruction Manual

Initial Settings

You can select following Initial Setting items.
1
Select the Standby
Pressing the [SRC] button repeatedly switches
source.
Select the "STANDBY" display.
✍ SRC Select mode 2: Press the [SRC] button and
then turn the [VOL] knob. To determine the
selected source, press the [VOL] knob.
2
Enter Menu List mode
Press the [MENU] button.
3
Enter Initial Setting mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select "Initial Settings".
4
Select the setting item to adjust
Turn the [VOL] knob.
Display Overview
"Initial Settings"
"SRC Select" Sets the source selection method.
"Settings 1"/ "2"
"Beep" Setting the operation check sound (beep sound)
*
ON/OFF.
"OFF"/ "ON"
"TAG Language" Selects the language for using on the display.
(KDC-X8019BTL only)
"English"/ "Arabic"/ "Persian"/ "Thai"
"Menu Language" You can select the display language for the
Menu list item. (KDC-X8019BTL only)
"English"/ "Persian"
"Chinese" Selects Chinese as the display language.
(KDC-X8019BT only)
"OFF"/ "ON"
"Built in AUX" When this is set to ON, AUX source can be
selected.
"ON": Allows AUX source to be selected. Use
this setting when the built-in AUX terminal
is connected to the external equipment all
the time.
"OFF": Disable AUX source selection. Use this
setting when the built-in AUX terminal is
not used.
"Forced CD-DA" Sets the CD read mode.
"Settings 1": Automatically distinguishes
between audio file disc and music CD when
playing disc.
"Settings 2": Forces playing as music CD.
"Built in AMP" Selecting "OFF" turns off the built-in amplifier.
Turning off the built-in amplifier improves the
quality of the sound from Preout.
"OFF"/ "ON"
"Panel Beep" Informs you by sound that you forgot to detach
*
the faceplate when ACC is set to OFF.
"ON"/ "OFF"
"DSI" DSI (Disabled System Indicator) of the unit blinks
when the faceplate is removed.
"ON"/ "OFF"
"F/W Update" Updates the firmware. The update information
will be posted on the following URL as
necessary.
www.kenwood.com/cs/ce/
* This setting cannot be made when the speaker system is
connected in the 3-way mode.
5
Make a setting
Turn the [VOL] knob to select a setting value,
and then press the [VOL] knob.
6
Exit Menu List mode
Press the [MENU] button for at least 1 second,
and then press it again briefly.
( : Factory setting)
33
English |