Configure Ethernet Using Dhcp; Configure Ethernet Using A Static Ip - ClearOne CONVERGE Pro 2 Quick Start Manual

5. Type the password for the selected network in the Password field.
6. If you need to configure a proxy or set a static IP address, check
the advanced options check box.
7. Configure advanced options as needed.
8. Tap Connect.

Configure Ethernet using dHCP

If you're planning to connect the Touch Panel Controller to a CONVERGE
Pro 2 via Ethernet using DHCP , no further configuration is required.

Configure Ethernet using a static IP

To use Ethernet using a static IP address, follow these steps:
1. Tap .
2. Tap Network.
The Network screen appears.
3. If it's not already selected, tap Ethernet.
4. If it's not already selected, tap static IP address.
5. Type values for the IP address, subnet mask, Gateway address,
dNs 1, and dNs 2 fields.
6. Tap apply.
Quick-Start Guide
13